CSPP Geo GRB 0.4.7 patch for EXIS, SEISS and MAG products

CSPP Geo GRB 0.4.7 patch for EXIS, SEISS and MAG products

Postby jbraun » Thu Jun 14, 2018 11:46 am

Dear Colleagues,

A software update to the GOES-16 ground system is planned for either Monday, June 18, or Tuesday, June 19, which will make format and content changes to the EXIS, SEISS and MAG products in the GRB data stream. The CSPP Geo team has developed a patch to the GRB software package that will allow continued generation of those products after the changes go live. The patch should be applied in sync with the ground system change, since the software changes are not backward compatible with the current EXIS, SEISS and MAG products. CSPP Geo users who do not use EXIS, SEISS and MAG products will not need to apply the CSPP Geo patch at all, as generation of products from other instruments will not be affected.

The patch has been developed according to the technical specifications in the GOES-R Series Product Definition and Users' Guide, and has been tested on sample data from the ground system. The software will be tested on live GRB data when the change goes into effect, and if any issues are found, a new patch will be released to users as soon as possible.

We have been informed that OSPO will send an ESPC notification as soon as the change goes live in the ground system. We will post updated information to this forum thread as it becomes available, including the status of the ground system change, CSPP Geo software test results and any new patches.

**Update instructions for users who are currently running GRB v0.4.6:**

1) Download the patch tarball.

wget ftp://ftp.ssec.wisc.edu/pub/CSPP/GEO/GRB/v0_4_7patch/cspp-geo-grb-0.4.7-patch.tar.gz

2) Check that the installed software version is 0.4.6, as identified at the top of the README. If you are running another software version, you must do a fresh install, as described below.

cd $CSPP_GEO_GRB_HOME
cat README

3) Stop the ingestor (if running)

cspp-rt-grb.sh stop

4) Apply the patch

tar xf /path/to/cspp-geo-grb-0.4.7-patch.tar.gz

5) Check that the software version is now 0.4.7 in the README

cat README

6) Restart the ingestor (if desired)

cspp-rt-grb.sh start


**Install from scratch instructions for new users or users who are running older versions of GRB:**

1) Download and install GRB 0.4.6. Refer to the README in the package and the v0.4 Installation Guide for information on installing and running the software.

Software: ftp://ftp.ssec.wisc.edu/pub/CSPP/GEO/GRB/v0_4_6/cspp-geo-grb-0.4.6.tar.gz
V0.4 installation guide: ftp://ftp.ssec.wisc.edu/pub/CSPP/hidden/GEO/GRB/v0_4/CSPP_Geo_GRB_Installation_Guide_v0.4.pdf

2) Follow the instructions above to update the software by applying the patch.


If you have any questions or comments regarding this release, please post a message to the CSPP Geo forum, or contact csppgeo.issues@ssec.wisc.edu.

Best regards,
The CSPP Geo team
jbraun
 
Posts: 61
Joined: Thu Sep 18, 2014 11:25 am

Re: CSPP Geo GRB 0.4.7 patch for EXIS, SEISS and MAG product

Postby jbraun » Mon Jun 18, 2018 10:16 am

We received this notification from ESPC Operations stating the date/time of the planned software update to the GOES-16 Ground System:

******************************
Topic: GOES-16 software patch installation scheduled for June 19, 2018

Date/Time Issued: June 15, 2018 2135 UTC

Product(s) or Data Impacted: GOES-16 EXIS, SEISS, and MAG products

Date/Time of Initial Impact: June 19, 2018 1400 UTC

Date/Time of Expected End: N/A

Length of Outage: N/A

Details/Specifics of Change:

A GOES-16 software patch is planned to go live on June 19, 2018 at approximately 1400 UTC. An ESPC Notification will be issued when the patch goes live. This patch will result in structural changes to EXIS, SEISS, and MAG products on the GOES Rebroadcast (GRB) and netCDF files to PDA. The Work Requests and Algorithm Discrepancy Report numbers are listed below. This patch has been coordinated through the GRB User Group.

For more details, please go to the following site:

https://www.ospo.noaa.gov/Operations/GO ... patch.html

Contact Information for Further Information: Jim McNitt (the GRB User Group Chairman) james.mcnitt@noaa.gov or ESPC Operations at ESPCOperations@noaa.gov or 301-817-3880

Web Site(s) for applicable information:

See http://www.ssd.noaa.gov/PS/SATS/messages.html for this and other satellite related messages.
jbraun
 
Posts: 61
Joined: Thu Sep 18, 2014 11:25 am

Re: CSPP Geo GRB 0.4.7 patch for EXIS, SEISS and MAG product

Postby jbraun » Tue Jun 19, 2018 11:02 am

Another notification update from ESPC Operations:

***********************************
Topic: Patches DO.06.03.00 and DO.06.04.00 becoming operational on OE

Date/Time Issued: June 19, 2018 1551Z

Product(s) or Data Impacted: Multiple algorithm updates will impact science products

Date/Time of Initial Impact: June 19, 2018 1527Z

Date/Time of Expected End: N/A

Length of Outage/Event: N/A

Details/Specifics of Change: Making the DO.06.03.00 baseline operational on OE.

*Note: DO.06.04.00 was internal Ground system monitoring changes to accompany the product improvements in DO.06.03.00.

Contact Information for Further Information: crystal.a.mcclide@nasa.gov
jbraun
 
Posts: 61
Joined: Thu Sep 18, 2014 11:25 am


Return to Announcements

Who is online

Users browsing this forum: No registered users and 1 guest