NOAA VIIRS Active Fire Software Version 1.1 Release

NOAA VIIRS Active Fire Software Version 1.1 Release

Postby kathys » Thu Mar 14, 2019 2:55 pm

The Community Satellite Processing Package (CSPP) project at CIMSS/SSEC/UW-Madison is pleased to announce the release of a new version of the NOAA JPSS VIIRS Active Fire Software in support of direct broadcast Suomi-NPP and NOAA-20 satellites.

The NOAA JPSS Active Fires Team is led by Ivan Csiszar at the NOAA NESDIS Center for Satellite Applications and Research (STAR). NOAA’s VIIRS active fire product development has been done through collaboration between STAR, the University of Maryland and the NASA VIIRS Land Science Team. This CSPP release provides the NESDIS Data Exploitation (NDE) operational version of the 750m “M-band” algorithm and the NESDIS/STAR version of the 375m “I-band” algorithm, both adapted and tested for execution in a real-time direct broadcast environment.

Retrieval software is provided for both VIIRS M-Band (750m) and I-Band (375m) resolutions. Users can choose one or both resolutions. The software includes binary executable files, wrapper scripts and supporting static data files. A separate test data package can be downloaded for verifying a successful installation.

What's New in CSPP Active Fire Version 1.1?

    Support for both NOAA-20 and S-NPP VIIRS;
    Support for retrievals at both I-Band (375m) and M-Band (750m) resolutions;
      I-Band retrievals require the VIIRS Calibrated Dual-Gain Band Files (IVCDB*.h5). Instructions are included on how to execute the CSPP SDR software in order to produce and save the IVCDB*.h5 files.

Two output product types are created per granule for each I-Band and M-Band execution. These product types are:

1) NetCDF4 product file that includes these Key Parameters:

    A fire mask that includes the confidence of fire at that pixel;
    Location of the active fire in terms of granule line/element and latitude/longitude;
    M-Band 13 brightness temperature of fire pixel (K) or I-Band 4 brightness temperature of fire pixel (K)
    Fire radiative power (MW).

2) ASCII Text File containing the following information:

    Latitude of fire pixel (degrees);
    Longitude of fire pixel (degrees);
    M-Band 13 brightness temperature of fire pixel (K) or I-Band 4 brightness temperature of fire pixel (K);
    Along-scan fire pixel resolution (km);
    Along-track fire pixel resolution (km);
    Fire detection confidence;
    Fire radiative power (MW).

Please note that the ASCII Text File is created for a VIIRS granule when there has been at least one active fire detected within that granule. Therefore, your output may consist of more NetCDF4 granule data files than ASCII output granule text files.

In addition to describing how to install and execute the software, the installation guide includes instructions on overlaying the output fire products onto an underlying GeoTIFF image (either Polar2Grid true color or a Blue Marble background).

The CSPP NOAA Active Fire software Version 1.1, documentation and test data are available for download at: http://cimss.ssec.wisc.edu/cspp/download/
kathys
 
Posts: 242
Joined: Tue Jun 22, 2010 4:51 pm

Return to Announcements

Who is online

Users browsing this forum: No registered users and 0 guests

cron