Unable to produce VIIRS SDR outputs with CSPP 4.0 but VIIRS geolocation matches

[bwhender12]

I followed the instructions in the CSPP_SDR_Installation_Guide_v4.0.pdf and am having mixed results running the test cases in the installation document.

I have installed Ubuntu 20.04.6 with WSL (though I also tried CentOS7 install also and same results) on a laptop with the specs shown at the bottom of this post.

The CrIS SDR geolocation and SDR products match and validate completely on my installation.
The VIIRS SDR geolocation is produced and matches the results in the installation. However, the VIIRS SDR products are not produced as products are removed when a NAN or INFINITY error is encountered in the M3 band for all granules.

ProSdrViirsCalController.exe_1234_119419.log:2023-11-02 11:44:14.130000Z DBG_HIGH ProCmnMessage.cpp(295)[ProSdrViirsCalC (23368973831296)]: INFSTATUS: ProSdrViirsCal PRO_ERR (NAN or INFINITY in product with groupname: Image_Band03UNSCALED ) TaskType=GRANULE, GranuleId=J02003624253750, GranuleVersion=A1, Spacecraft=J02, Sensor=VIIRS

OMPS SDR products are produced but only the geolocation and the NP products match. The TC SDR product does not match but is produced.

ATMS SDR is in a similar fashion, produced products but only the geo is matching I believe.

The VIIRS SDR product having NANs or INFINITY makes me think that an input is possibly bad or there may be an endian issue on an input.

I downloaded only LUT and ancillary data for the test data date.

Anyone have any thoughts on why the VIIRS SDR is unable to produce results in this setup?

bwhender01@DESKTOP-MT7UBQ5:~$ free -h
total used free shared buff/cache available
Mem: 31Gi 502Mi 30Gi 3.0Mi 735Mi 30Gi
Swap: 8.0Gi 0B 8.0Gi

bwhender01@DESKTOP-MT7UBQ5:~$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 39 bits physical, 48 bits virtual
CPU(s): 12
On-line CPU(s) list: 0-11
Thread(s) per core: 2
Core(s) per socket: 6
Socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 165
Model name: Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz
Stepping: 2
CPU MHz: 2592.006
BogoMIPS: 5184.01
Virtualization: VT-x
Hypervisor vendor: Microsoft

[scottm]

Hi,

Sorry you are experiencing problems. Run atms_sdr.sh -d and send me the cspp logfile and a log file from the first granule subdirectory. Send the entire file. srmindock@wisc.edu. Your machine seems to only meet the minimum specs and we do not have a lot of experience with windows machines.

[bwhender12]

Scott,

I've sent the requested artifacts for ATMS.

Thanks,

Bryan Henderson